factory T10 T8 led tube fixture
1.3528SMD Source,7-7.5lm/led
2.Above 50000hrs life
3.CE, Rohs,0.6-1.2mm
4.Aluminum PCB
Port: ShenZhen
Minimum Order Quantity: 10 Piece/Pieces
Supply Ability: 5000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
factory T10 T8 led tube fixture CE RoHS
1)T8 led tube light Feature1. a good power supply compatibility:the range of driving voltage and frequency is wide,adapt to public grid easily. Applicable to most countries and regions.
2) high reliability: non-isolated power supply, built-in over-current, overload, short circuit protection.
3) sturdiness and durability: the main use of high quality alloy material.
4) High lightness: internal LED light source selection of high-grade chips, high luminous efficiency, long life.
2. Details
NO | Length | Product NO. | LEDtyple/quantity | Materal | Color Temperature(K) | Power | Luminous Flux |
1 | 0.6M | YLL-T8DIP8X-C | 120pcs/smd led | Alloy+PC | 2700-6500K | 8W | 800LM |
2 | 0.9M | YLL-T8DIP12X-C | 180pcs/smd led | Alloy+PC | 2700-6500K | 12W | 1200LM |
3 | 1.2M | YLL-T8DIP18X-C | 288pcs/smd led | Alloy+PC | 2700-6500K | 18W | 1800LM |
4 | 1.5N | YLL-T8DIP22X-C | 360pcs/smd led | Alloy+PC | 2700-6500K | 22W | 2200LM |
3. Electrical specification
Length | Product name | voltageAC(V) | FHz | P(W) | Power factor | Efficiency | Input current(mA) | Insulation intensity Vac | Alternative specifications(W) |
0.6M | YLL-T8DIP8X-C | 110/220 | 50 | 9 | ≥0.9 | ≥90% | 27.3 | 1000 | 20 |
0.9M | YLL-T8DIP12X-C | 110/220 | 50 | 12 | ≥0.9 | ≥90% | 54.5 | 1000 | 30 |
1.2M | YLL-T8DIP18X-C | 110/220 | 50 | 18 | ≥0.9 | ≥90% | 82 | 1000 | 36 |
1.5M | YLL-T8DIP22X-C | 110/220 | 50 | 20 | ≥0.9 | ≥90% | 91 | 1000 | 45 |
4. Package
Tube type | Qty per Ctn | Qty per inner box | Size of Ctn/cm | GW/Ctn | NW/Ctn |
1.5M tube | 20 pcs | 1 pc | 163x75x45 | 17.6KGS | 13.2KGS |
1.2M tube | 20 pcs | 1 pc | 133x75x45 | 14.9KGS | 10.5KGS |
0.9M tube | 20 pcs | 1 pc | 133x75x45 | 12.5KGS | 7.9KGS |
0.6M tibe | 20 pcs | 1 pc | 133x75x45 | 14.5KGS | 10.5KGS |
5. Environment requirements
Working temperature: -20 degree to 40 degree
Storage temperature: -30 degree to 60 degree
Working humidity: 30% to 85%
Storage humidity: 10% to 90%
6.Installation
1)remove the fluorescent tubes and starter device.
2)open the stent cover, change the connection mode.
3)covered stent installed, the installation of LED lamp.
7. Attentions
1)LED tubes can be used for the traditional T8, T10 bracket.
2)LED fluorescent tubes must be based on the correct specification voltage.
3)LED lamp can not be opened on their own, indoor use.
4)During transport to avoid the rain and strong mechanical vibration.