UL T8 led light
1. UL,CSA,LM79,ROHS
2. CRI>80,98lm/W
3. THD<10%
4.85-347V
Port: shenzhen
Minimum Order Quantity: 5 Piece/Pieces
Supply Ability: 30000 Unit/Units per Month
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: 20 pcs per carton,carton dimensions:135*25*23cm, N.W.:14.1kgs/ctn,G.W.:16.2kgs/ctn.
Delivery Detail: 7-15 days 1000pcs per month
UL T8 led light
led none tube light specification
led none tube light advantages
1. Superior optical benefits: high lumen efficacy up to 96lm/W and high illumination up to
70 lux/3m high;
2. Great material for heat sink: alluminium board and reflector guarantee double heat releasing
to avoid light depreciation and prolong lifespan up to 50,000hrs;
3. Strict quality control.3 days aging/burning test before shipment:
24hrs for aging light source;
24-48hrs for aging drivers and avoid shorts;
48-72hrs for aging leakage;
48-72 hrs for aging IC,compacitor and resistor.
4. We have a strong team to challenge your tough OEM&ODM case;
5. Implement the ISO9001: 2008 management system,every department works as a team,
orderly and efficiently.
led none tube light Installation manual
1. Turn off power
2. Remove old Fluorescent tubes
3. Access the ballast by removing ballast cover
4. Disconnect and cut wires feeding to the ballast input (live and neutral wires) they should remain as long as possible
5. Disconnect and cut the wires from the ballast output to the sockets (cut wires close to the ballast)
6. Connect the 2 socket wires to the 2 input wires (live and neutral) from step #4
7. Install ballast cover and LED tubes, turn power on.